The name of this case is after my son, Theo - this is the game case that was custom made for him.
This case was not expensive to do. This is a cheap no-name case. The mesh used throughout cost me 2 x 8 euros for 50x50cm (about $14USD). The screws were 20 euros ($17US) and the LEDs another 20 euros. Some regular dremel disks, sandpaper, and other consumeables for tools.
The power and reset buttons are drilled plexi. You can see that they glow.
The feet were made from wood blocks, plexi, and wrapped in very thin aluminum.